Discuz! Board

标题: [代码|Code]获取附件|Get Attachment [打印本页]

---

作者: Jerry小坏    时间: 2017-7-13 16:43
标题: [代码|Code]获取附件|Get Attachment
1. 获取附件坐标|Get Attachment Origin
说明|Description:
[CN]由于客户端与服务端的延迟，这个方法不适合玩家实体
[EN]This way is not for "Player Entity" because of the lag between ClientSide and ServerSide

1. new Float: __float_Org[ 3 ], Float: __float_Ang[ 3 ];
   
2. engfunc( EngFunc_GetAttachment, __int_Client, 0, __float_Org, __float_Ang );

复制代码

2.实体附件索引|Entity Attachment Index
说明|Description:
[CN]此方法对玩家实体和模型实体通用
[EN]This way is for both "Player Entity" and "Model Entity"

1. /*
   
2. Attachment 0( Client|0x1000 ) = Right Hand( Usually )
   
3. Attachment 1( Client|0x2000 ) = Left Hand( Usually )
   
4. Attachment 2( Client|0x3000 ) = Extra
   
5. Attachment 3( Client|0x4000 ) = Extra
   
6. */
   
7. message_begin( MSG_ALL, SVC_TEMPENTITY );
   
8. write_byte(TE_BEAMENTPOINT);
   
9. write_short( __int_Client|0x1000 );// Right Hand ( Usually )
   
10. engfunc( EngFunc_WriteCoord, __float_Org[ 0 ] + random_float( -10.000_000, 10.000_000 ) );
    
11. engfunc( EngFunc_WriteCoord, __float_Org[ 1 ] + random_float( -10.000_000, 10.000_000 ) );
    
12. engfunc( EngFunc_WriteCoord, __float_Org[ 2 ] + random_float( -10.000_000, 10.000_000 ) );
    
13. write_short( 101 );
    
14. write_byte( 10 );
    
15. write_byte( 10 );
    
16. write_byte( 5 );
    
17. write_byte( 2 );
    
18. write_byte( 3 );
    
19. write_byte( 255 );
    
20. write_byte( 255 );
    
21. write_byte( 255 );
    
22. write_byte( 255 );
    
23. write_byte( 50 );
    
24. message_end();
    
25. 
    
26. message_begin( MSG_ALL, SVC_TEMPENTITY );
    
27. write_byte(TE_BEAMENTPOINT);
    
28. write_short( __int_Client|0x2000 );// Left Hand ( Usually )
    
29. engfunc( EngFunc_WriteCoord, __float_Org[ 0 ] + random_float( -10.000_000, 10.000_000 ) );
    
30. engfunc( EngFunc_WriteCoord, __float_Org[ 1 ] + random_float( -10.000_000, 10.000_000 ) );
    
31. engfunc( EngFunc_WriteCoord, __float_Org[ 2 ] + random_float( -10.000_000, 10.000_000 ) );
    
32. write_short( 101 );
    
33. write_byte( 10 );
    
34. write_byte( 10 );
    
35. write_byte( 5 );
    
36. write_byte( 2 );
    
37. write_byte( 3 );
    
38. write_byte( 255 );
    
39. write_byte( 255 );
    
40. write_byte( 255 );
    
41. write_byte( 255 );
    
42. write_byte( 50 );
    
43. message_end();
    

复制代码

Q: 怎么为模型添加附件？|How to add attachment for a model?

A: 在QC文件里面使用$attachment语句|Use the function "$attachment" in the QC file

1. //$attachment Index "Joint Name" X Y Z
   
2. $attachment 0 "Bip01 R Hand" 2.000000 2.000000 0.300000
   
3. $attachment 1 "Bip01 R Hand" 2.000000 2.000000 0.000000
   
4. $attachment 2 "Bip01 L Hand" 0.000000 0.000000 0.000000
   
5. $attachment 3 "Bip01 R Leg" 0.000000 0.000000 0.000000

复制代码

---

欢迎光临 Discuz! Board (https://esfbbs.foxnyx.top/)

Powered by Discuz! X3.2